Synthetic lifelines
Colligo Dux Lifelines are the strongest and toughest synthetic lifelines available. Made from work hardened Dyneema SK-75 (Dynex Dux) in 5 mm diameter.
11,000 lbs-f breaking strength.
Easily Spliceable!
Designed with sacrificial lashing ends to extend the life of your lifelines. Just change the lashings every 2-3 years and your lifelines will last at least 5-8 years in the tropics.
Use Line Terminators on the 5mm dux to maintain the large bending radius and to extend its life, then lash to the pulpits and gate eyes with cheaper (and more flexible) SK-75 line.
Use flexible SK-75 line for gates.
Our Line Terminator end fittings allow the use of stopper knots that give great lashing flexibility. Its easy to lash to almost anything!
(See the stopper knot instructions under Documents to the right on this page.)
Dyneema lifelines are approved for offshore use by US Sailing and ISAF (International Sailing Federation)
Important Dyneema Lifeline Guidelines here
Please read this before you do anything!
US$1.00
dyneema lashing line 3/16" (5mm) in diameter. Use for lashing and for gates. Breaking strength 5400 lbs-f.
Product Details...
US$1.79
Work hardened Dyneema SK-75 (Dynex Dux) is 40% stronger, much tougher and more chafe resistant than regular Dyneema. It is by far the best synthetic line to use for lifelines. Breaking Strength is over 11,000 lbs-f. The toughest thing about splicing th
Product Details...
US$39.00
Gate eyes for lashing to stanchions. Made from 316 stainless steel. 5/16 inch (8mm) diameter threaded shaft that fits thru lifeline holes on stanchions.
Product Details...
US$169.00
Lifeline kit without gates. includes 38 feet of 5mm Dynex Dux, 2 Line Terminators, 10 feet 3/16" dyneema lashing line.
Product Details...
US$269.00
Lifeline kit without gates. includes 30 feet of 5mm Dynex Dux, 2 Line Terminators, 10 feet 3/16" amsteel blue lashing line.
Product Details...
US$24.99
Our Line Terminator End Fitting for lifelines. designed to maximize the life of Dyneema line by maintaining a large bending radius to minimize bending stresses. Designed to be use with stopper knots that make lashing easy.
Product Details...
US$39.00
Simple, lightweight, pelican hook for lifeline gates. SWL 300 lbs-f, breaking strength 1,200 lbs-f. 316 stainless steel.
Product Details...
US$35.00
Simple, lightweight, snapshackle for lifeline gates. SWL 1,000 lbs-f, breaking strength 4,000 lbs-f. 316 stainless steel.
Product Details...
Results 1 - 8 of 8
Recently Viewed Products