Lifeline Spec Form

Colligo Marine can spec custom synthetic lifelines for boats of any size. We use standard 5mm Colligo Dux 12-strand line with a breaking strength of 11,000 pounds - strong enough for even the largest boats! The lifeline kits will come with all Terminator fittings and gate hardware (if required) you'll need to build your lifelines. Do it yourself or see our list of Certified Riggers who can help you with the install. Recently a new-build Discovery 55 used our lifeline technology for an elegant, simple and strong lifeline solution.

NOTE: Your measurements below need only be 'rough.' We'll send you more than enough material to splice and install the lifelines, including detailed instructions on how to do so to get the measurements exact (click here for a PDF of those instructions). So don't stress too much at this stage! If you complete the form below, we'll have the info we need to provide you with the right materials.


Instructions
*Read each section very carefully! Complete the form below for a custom synthetic Colligo Dux lifeline kit for your boat. We'll email you a quote including everything you need to build your own lifelines, sized perfectly for your boat type and with all the bells & whistles you desire.
Name *
Name
Phone *
Phone
Lifeline Specs
Termination Specs
Below you'll indicate the termination style on your stanchions, where the lifelines will attach and be tensioned.
Please select the termination style on the forward end of your lifelines. This will usually be an eye welded onto the pulpit.
If 'other' above, please describe.
Please select the termination style on the aft end of your lifelines. This will usually be an eye welded onto the pulpit.
If 'other' above, please describe.
Lifeline Specs w/ Gates
If you'd like gates in your lifelines, you'll spec them below in 'sections' - a section forward of the gate, the gate itself, and a section aft of the gate. Follow the prompts below. If you'd like gates only one side, complete both sections. If you'd like no gates, skip to the next section. You only need to measure the longest lifeline (top or bottom) for each section. We'll use the 'Lifeline Style' (single, double, etc.) you indicated above to determine the total length of Dux to send you.
Choose the style of closure for your gates.
If you have holes in your gate stanchions, you'll need 'gate eye' hardware that we can provide. Please indicate style here.
If you have holes in your gate stanchions, you'll need 'gate eye' hardware that we can provide. Please indicate style here.
Measure the pin-pin length of the section from gate termination to the bow, portside.
Measure the pin-pin length of the section from gate termination to the bow, starboard side.
Measure the pin-pin of the gate section, portside. This will be standard Dyneema rather than Dux, as it's easier to open & close.
Measure the pin-pin of the gate section, starboard side. This will be standard Dyneema rather than Dux, as it's easier to open & close.
Measure the pin-pin length of the section from gate termination to the stern, portside.
Measure the pin-pin length of the section from gate termination to the stern, starboard side.
Lifeline Specs w/out Gates
Complete this section if you'd like continuous lifelines. You only need to measure the longest lifeline (top or bottom). We'll use the 'Lifeline Style' you indicated above to determine the total length of Dux to send you.
Measure the longest lifeline (usually the top) from bow termination to stern termination, portside. Be sure to have the tape run on the outside of the stanchions!
Measure the longest lifeline (usually the top) from bow termination to stern termination, starboard side. Be sure to have the tape run on the outside of the stanchions!
Cover Options
We can include a synthetic cover for your lifelines in a variety of colors. A popular option is to cover the top lifeline only - the one you'll be handling the most - and leave the lower lifeline(s) uncovered Dux.
If you selected covered above, select your color here. Custom colors may be available - please contact us.
We can include Dyneema lashing line for your lifelines and will provide the appropriate amount here based on the above specs, if needed. Alternatively you can supply your own lashing line.
Please mention any other info you feel is pertinent here.