|
|
Hurricane Anchoring System: $199.00 each + S&H
Several of our customers have asked for this
for setting up a mooring for hurricane protection. Double Bridle Plate
with swivel and shackles for setting up a triple anchor system to moor to for
maximum hurricane protection. Run one plate to three anchors and the other
plate using 2 or 3
lines to your boat, Monohull or multihull. Two hot dipped galvanized plates with our 3/4 inch safety swivel and
5 or 6, 5/8 inch safety shackles.
More Information. |
Monohull- Bridle Plate Systems
 |
Hot dipped Galvanized Monohull Bridle Plate System: $99.00
each + S&H
Monuhull Bridle Plate System. Hot dipped galvanized to
>4 ml plating. 3/4 inch swivel and 2, 5/8 inch shackles. More
Information.
|
 |
Hot dipped Galvanized Monohull Bridle Plate System with Safety
Swivel and Shackles: $135.00 each + S&H
Same as above monohull system but with Safety Shackles and Swivel. Pins
use nuts with cotter pins and need no seizing for extra security.
More Information |
Multihull- Bridle Plate Systems
 |
Hot dipped Galvanized Multihull Bridle Plate System: $115.00
each + S&H
Multihull Bridle Plate System. Hot dipped galvanized to
>4 ml plating. 3/4 inch swivel and 3, 5/8 inch shackles.
More Information.
|
 |
Hot dipped Galvanized Multihull Bridle Plate System wth Safety
Swivel and Shackles: $129.00 each + S&H
Same as above multihull system but with Safety Shackles and Swivel. Pins
use nuts with cotter pins and need no seizing for extra security.
More Information.
|
Mooring Lines
 |
40 ft long, 3/4 inch, Double Braided Nylon: $99.00 ea +
S&H
Premium nylon, double Braided construction gives needed
stretch and chafe protection. 3/4 inch diameter gives an average tensile
strength of over 19,000 lbs. Stainless steel thimble with the best
splicing and whipping we have ever seen. Extra long length allows
redundant cleating and future re-splicing.
More Information.
|
 |
25 ft long, 3/4 inch, Double Braided Nylon: $79.00 ea +
S&H
Premium nylon, double Braided construction gives needed
stretch and chafe protection. 3/4 inch diameter gives an average tensile
strength of over 19,000 lbs. Stainless steel thimble with the best
splicing and whipping we have ever seen.
More Information.
|
|
