Standard Chainplate Distributors (Female)
For standard chainplates.
Chainplate Distributors Explained
Our Distributors are designed for setting up the tension of your line through lashings at chainplates on deck, mast fittings, or even turnbuckles. Chainplate distributors are used when you choose lashings for your tensioning system. We recommend lashings only for smaller boats (<30' LOA) or specific multihull applications. They feature the following:
- 4 lashing lines for greater load distribution and easy tensioning
- Wide lashing hole distribution for easy final tensioning
- Hardcoat anodizing
- Extra large sections for higher strength rating
- Made from 6061-T6, Billet Aluminum
- Sleeved mounting pin holes for long term durability
Note: Some pin size flexibility is designed into these parts - meaning, you can always go slightly smaller if you're in between sizes. Indicate your custom size in the 'Additional Notes' section during checkout.
U.S. Patent No. 8201309 B1
Up to 1/4" lashing line and 1/2" pin with Isolator sleeve (5/8" pin without sleeve)
Up to 1/4" lashing line and 5/8" pin with Isolator sleeve (3/4" pin without sleeve)
Up to 5/16" lashing line and 5/8" pin with Isolator sleeve (7/8" pin without sleeve)
Up to 5/16" lashing line and 7/8" pin with Isolator sleeve (1, 1/4" pin without sleeve)
Up to 1/4" lashing line and 3/8" pin with Isolator sleeve (1/2" pin without sleeve)
Up to 1/4" lashing line and 1/2" pin with Isolator sleeve (5/8" pin without sleeve)
Up to 1/4" lashing line and 1/2" pin with Isolator sleeve (5/8" pin without sleeve)